SAS120 is a suspended metal ceiling system with clip-in modular tiles and concealed grid.
Note: This includes the entire system and full associated components (suspension, tile, acoustic pad and associated fixings)
STANDARD MODULE SIZES (MM) WITH 4MM BEVEL TILES
STANDARD MODULE SIZES (MM) WITH 2MM BEVEL TILES
Bespoke tile sizes are available on request. Please contact our technical department for further information.
Square edge tiles are also available on request. However, SAS International will always recommend a bevel edge tile to improve overall system appearance. Minute differences between tiles with square edges are often exaggerated when lit, resulting in a less pleasing finish overall.
Other specialist powder coat finishes are available on request. For more information on non-standard finishes, please contact our technical services team.
Other tile shapes are available on request, although involve a significantly higher level of manufacturing complexity. Please contact our technical department for further information.
(16mm deep, 80Kg density mineral-wool pad with black tissue face, foil back and sides).
Other acoustic treatments are available, depending on project requirement. Please contact our technical department for more information.
Tiles can be formed with apertures during manufacturing for integration with lights and other services.
An SAS Pattress distributes the load of the services directly to the grid. In this way, services up to 6Kg can be supported. The tiles themselves can only support loads of no greater than 2.5Kg.
Loads greater than 6Kg we would recommend using independent suspension. If you have a concern over loads, please contact our technical team for advice.
SAS120 is particularly suited to environments requiring strict cleaning regimes.
The Clip-in tiles are fixed, so upward pressure can be applied to remove stubborn stains without displacing the ceiling.
Tiles can be painted both sides in high humidity environments to ensure long term performance.